Product overview

     SP9000 Bellow-balance Self-operated Pressure Regulator is a spring-setting direct-operated universal pressure regulator. It can be widely used for low-corrosive gases and low-viscosity liquids. With corresponding settings, it can be use for up-stream and down-stream pressure control. The lowest control pressure is 3Kpa and the highest control pressure is 3000Kpa. The lowest operating temperature is -48 ℃ and the highest operating temperature is 300℃.

Features

▲Convenient configuration - normalized modular design allows the changeover between down-stream and up-stream pressure control mode, different regulation ranges and operating temperature can all be performed with the replacement of extremely few parts.
▲Overload safety - The safety shall be ensured under any circumstances. The self-operated regulator allows working medium to enter the actuator, so the overload of the system usually badly damaged the regulator. The overload protection mechanism of SP9000 regulator can safely bear the overload pressure one to few dozens times higher than the upper limit pressure of the regulation range. The overload pressure can reach the nominal pressure of the valve in most configurations.
▲Reliable sealing- The valve stem of SP9000 regulator is a long bellow structure. Sealing O-ring is used as a back-up sealing method, which provides an extremely reliable sealing for valve stem.
▲High accuracy- The friction of bellow stem is far lower than conventional stuffing structure. The optimally designed spring and actuator will definitely find their best combination for process pressure, which makes the regulator have very high overall control accuracy.
▲Easy adjustment - the adjustment of pressure settings can be easily done by turning of adjustment nut. The adjustment operation is more easy and fast due to the elimination of conventional standing pole structure.
▲Strong adaptability- there are multiple actuator types, valve spool structures, rubber parts materials available to meet the operational requirements of different medium and temperatures.
▲Bellow-balance spool- it features low resistance, corrosion-resistance and heat-resistance. It can reduce the unbalanced force caused by the differential pressure to a minimum level to ensure the differential pressure resistance performance and control accuracy.
▲Low leakage - single-seat spool has very low leakage during the closing of the regulator. The soft-sealed spool can completely shut off the flow and make the system enter into a constant-pressure status.
▲Stainless actuator - as an important part of the regulator, the actuator is made of stainless plate to ensure its high pressure-resistance and long service life.
▲Easy maintenance- the selection criteria of the every structure of the SP9000 regulator is to make sure the most convenient installation and maintenance while ensuring the performance requirements are met.
The top-mounted push-down installation method allows you to inspect and maintain the internal parts without any special tools before disassembling the regulator.
The bonnet central alignment method is adopted to avoid all unnecessary repeat matching operation. The internal part has sufficient clearance to make sure itself can be easily taken out or put in. The dissembling of the internal parts can be easily performed even the carton steel regulator rusts after long-term operation.
▲Universal parts – SP9000 regulator has extremely high parts universality with the whole self-operated products series manufactured by our company. It helps to reduce the inventory of spare parts.

Overall dimensions

Nominal diameter		40	50	65	80	100	150	200
L	PN16(150lb)	222	254	276	298	352	451	600
	PN40(300lb)	235	267	292	317	368	473	600
	PN64(600lb)	251	286	311	337	394	508	650
H1		402	412	575	575	582	825	895
Weight (kg)	PN16(150lb)	18	22	55	62	85	135	185
	PN40(300lb)	18	22	60	71	93	145	198
	PN64(600lb)	21	25	72	85	112	170	235

Note: the weight of the regulator changes with different configuration of the actuator. The weight provided here is an average weight.
The size of the actuator will be listed separately.

Single-diaphragm actuator no.	H2	A
01.01.00	71	157
01.02.00	71	191
01.03.00	71	233
01.04.00	71	327
01.09.00	68	157
01.10.00	68	157
01.12.00	71	233
01.13.00	71	327
01.05.00	88	191
01.06.00	88	233
01.07.00	88	327
01.08.00	88	494
01.14.00	105	191
01.15.00	105	233
01.16.00	105	327
01.17.00	105	494

 

Double-diaphragm actuator no.	H2	A
04.01.00	96	157
04.02.00	96	191
04.03.00	96	233
04.04.00	96	327
04.05.00	113	191
04.06.00	113	233
04.07.00	113	327
04.08.00	113	494
04.14.00	132	191
04.15.00	132	233
04.16.00	132	327
04.17.00	132	494

 

Bellow actuator no.	H2	A
03.01.00	119	186
03.02.00(03.07.00)	119	186
03.03.00(03.08.00)	119	186
03.04.00(03.09.00)	171	289
03.05.00(03.10.00)	171	289
03.11.00	142	186
03.12.00	205	289
03.13.00	205	289

 

SP5000 self-operated low pressure pressure relief valve |  SC2000 pneumatic regulating valve |  SP100H internal setting self-operated pressure regulating valve |  SP8000 bellows sealed pneumatic regulating valve |  SP9000 Bellows-balance Self-operated Pressure Regulator |  SP4000 Self-Operated Cage Pressure Regulating Valve |  SP3000 Self-Operated Single-Base Pressure Regulating Valve |  SP592 Commander Self-Operated Micro-Pressure Valve |  SP429 Small Flow Self-Operated Micro-Pressure Regulating Valve |  SP90H type Self-pressure regulating valve |